2Steps ahead of the rest..

Never heard of eSTAB or RPM Memory?

No surprise – it didn’t exist before!

It is these practice-based innovations that set the Fornax 2S/Scorpius apart from the crowd. Value is also placed on durability and safety. It goes without saying that the EN17067 standard and a performance level certification are fulfilled.

2Steps ahead of the rest…

Never heard of eSTAB or RPM Memory?

No surprise – it didn’t exist before!

It is these practice-based innovations that set the Fornax 2S/Scorpius apart from the crowd. Value is also placed on durability and safety. It goes without saying that the EN17067 standard and a performance level certification are fulfilled.

Interchangeable batteries (2 sets)

In addition to a box for the batteries and the USB charger, the accessories also include a 12V charging adapter so that the batteries can be charged directly in the tractor.

Illumination of the control panel

Even in the darkest forest, you can recognise the symbols and switch the desired switch with certainty.

Integrated work light

So simple, but sometimes so helpful. Switch on and off via push-button on the bottom.

Safety – eSTAB electronic stability protection

We care about your safety – that’s why our systems are optionally equipped with an occupational safety device (eSTAB) – this includes both an emergency stop function and a fully integrated motion sensor on the receiver.

Do not confuse eSTAB with an ordinary tilt sensor, because eSTAB not only protects against tipping of the tractor in both axes, but also against slipping and thus also secures the Z-axis – a first!

Equally unique is that eSTAB is integrated in the receiver and therefore no additional module needs to be installed. The (one-time) calibration of the zero position takes place within a few seconds and ensures unparalleled accuracy.

Calibration is child’s play

Calibrating eSTAB takes no more than 3 seconds. Simply make sure your tractor is on a level surface, hold the switch forward for three seconds and you will receive confirmation that calibration is complete.

Fornax 2S Basic

The Basic entry-level model offers the necessary functions – at the highest level

Fornax 2S Delta

This variant allows engine speed change + ‘RPM Memory’ in addition to the standard functions.

Fornax 2S Pro

With the professional model with maximum range of functions, the tractor can be fully controlled – double drum function is also possible.

Fornax 2S
Basic

Fornax 2S
Delta

Fornax 2S
Pro

THE MOST COMPACT RECEIVER

With the Scorpius receiver, we offer by far the smallest and most compact receiver on the market. Size is not the only thing that counts – the receiver’s inner values are just as unique and impress with state-of-the-art technology.

For example, there are no more relays – everything is switched with (safety) MOSFETs. Defective or stuck circuits as can happen with relays are ruled out here.

The receiver is fully encapsulated and thus IP68 classified.

Receive the productsheet

THE MOST COMPACT RECEIVER

With the Scorpius receiver, we offer by far the smallest and most compact receiver on the market. Size is not the only thing that counts – the receiver’s inner values are just as unique and impress with state-of-the-art technology.

For example, there are no more relays – everything is switched with (safety) MOSFETs. Defective or stuck circuits as can happen with relays are ruled out here.

The receiver is fully encapsulated and thus IP68 classified.

Receive the product sheet

Calibration is child’s play

Calibrating eSTAB takes no more than 3 seconds. Simply make sure your tractor is on a level surface, hold the switch forward for three seconds and you will receive confirmation that calibration is complete.

RPM Memory – Good for the environment and your wallet

With RPM Memory, the speed of the tractor can be stored and then immediately increased or reduced when the PULL function is used. This not only makes it much easier for you to work, but also reduces wear on your clutch.

Environmentally friendly, economical and efficient!

RPM Memory

Good for the environment and your wallet

With RPM Memory, the speed of the tractor can be stored and then immediately increased or reduced when the PULL function is used. This not only makes it much easier for you to work, but also reduces wear on your clutch.

Environmentally friendly, economical and efficient!

Certainly the most stable product

„In my 20 years of experience with radio wire rope winches, certainly the most stable product so far – no annoying interruptions due to vibrations or the like”

Thomas Aglas

Convinced by the many functions

„My Fornax Pro convinces above all with the many functions that I can control with it – the fully integrated eSTAB makes the work even safer”

Georg Ahorner

You won’t find that with any other remote control

„Really practical – I think the RPM memory function is excellent, you won’t find it on any other remote control.”

Laurenz Pilgerstorfer

Certainly the most stable product

„In my 20 years of experience with radio wire rope winches, certainly the most stable product so far – no annoying interruptions due to vibrations or the like”

Thomas Aglas

Convinced by the many functions

„My Fornax Pro convinces above all with the many functions that I can control with it – the fully integrated eSTAB makes the work even safer”

Georg Ahorner

You won’t find that with any other remote control

„Really practical – I think the RPM memory function is excellent, you won’t find it on any other remote control.”

Laurenz Pilgerstorfer

 

Request for quotation

You will usually receive feedback from your personal advisor within 24 hours.














    By using this form, you agree to our privacy policy.





    Remote control for in the forest

    The Fornax 2S is a remote control for forestry winches and, in combination with the Scorpius receiver, is the most innovative control available on the market. Manufacturers of any given brand of forest winches can operate their winches with the Fornax 2S remote control.